|
As
you can tell from the pictures above we had a good bit of what appears to be
spirit anomaly around the power lines. To learn a little more let's
consider the correlation between spirits and power lines. First let's
examine what we know about spirits. Spirits were once humans or animals that
have died, crossed over and then come back to assist us on the earth
plane.
Now
what is power or electricity? There are several definitions depending on
what we are referring to. There is no one exact definition for power or
electricity. There is electric charge, electrons, electric current,
electric phenomena, electric field, electrical energy and the list goes
on. We can get pretty detailed with this but we'll try to keep it
simple and talk about electrical energy. Each of these is a kind of
electrical energy: radio signals, telephone signals, microwaves, light,
x-rays, energy from electric companies and energy from batteries. Each of
these are the same except for the fact that their frequency is different.
Electrical
energy is also called "electromagnetic energy" or
"electromagnetic vibrations." Electrical energy is a type of wave
energy, and the energy-waves always move very quickly. When you turn on a wall
switch, the light bulbs light up instantly because the electrical energy moves
so fast. Electrical energy is a combination of two things: magnetic fields
and electrostatic fields. Electrical energy can be guided by wires, but also it
can travel through space without any wires. There is no basic difference
between "radio signals" and "AC Power", only their frequency
is different.
Some
of us have seen first hand and others of us have heard stories about electrical
appliances coming on by themselves. Such occurrences are lights on in a
room when they were physically turned off moments before, televisions clicking
on and off, computers on when they had been shut down, doorbells chiming for no
reason and the phone ringing but no one is there.
Let's
discuss how and why this happens. We mentioned that spirits have crossed
over and have come back. Where do they come back to? Is there a
portal? Could these power lines be a type of portal? We've
determined that spirits manifest as orbs, ectoplasm, ecto mist, or apparitions.
We've also determined that orbs, ecto and apparitions are basically patterns of
energy. We know that all electricity follows a circuit and we
know that electricity is an energy source. Doesn't it make sense then that
spirit energy would be plentiful around power lines? Many investigators
report that hauntings often occur where there is an electrical current, either
near appliances, telephone lines or power lines. It would seem that an
electrical energy producing area is a feeding area for spirits. This could
also be the reason that many hauntings take place during electrical
storms. It's a good idea to keep a regular check on the solar
stats.
We
took several EMF readings both around the power lines and a distance away from
them. In most cases we had unusually high readings. We knew they
would be high near the lines but we thought they would subside the further away
we went. We asked a friend, Earl, why we would get these readings and this
was his response. "That's a good question, look at
it like this. Have you ever stood near a transformer box that sets on the
ground? You will hear a "hum" of the electrical energy as it passes. I
have listened to a lot of recordings on the internet, and in many of them that
is exactly what you hear.
Now I don't know exactly where this happened to you,
but in this area From Pensacola to Ft Walton to Panama City to Jacksonville, you
have two huge barriers, those are electrical lines and military bases. For instance
I live in Mary Esther on the bay. Directly across from me is an Air Force
Communication Tower. While lines that run to your home or anywhere else are
filtered to eliminate "bleed over" it does occur, and very often.
The
Military, since it is what it is, runs as much power as they need to communicate
from point A to point B.
Now your EMF Meter do you have any idea what else it can detect?
Here is something for you to consider when you use one: These meters measure and
/ or detect EMF's (electromagnetic fields), RF - Radio/Microwave Fields,
Electric Fields, extremely weak static (or "natural") electric and
magnetic fields, negative air ions, radon and can be used to measure power
lines, monitors, TV's, CELL phones - Cell / Microwave transmission towers, alarm
clocks, electric blankets, microwave ovens, surveillance "bugs",
moving airborne magnetic sources, subtle / paranormal phenomena, fluorescent
lights, work stations, electric typewriters, copy machines, computers, etc.
It is for this reason that a meter can be a very good source
to detect but when used in a home environment all and any of the above can
off-set your reading. I saw a photo recently of a "spirit" in a home,
and they told of the reading they received while there, it had pegged their
meter. In front of them was a big screen TV turned on, a stereo in the corner,
and a work station complete with computer, and in the kitchen was a microwave.
This is why the meter was pegged, everything there was on.
Here is something else to consider.
A TV set takes a lot of electric
to run. It has a number of transformers in it to boost the input power to the
correct level. If that set is off and unplugged the electricity still held in
there is strong enough to kill you, and an EMF meter will detect it, if the meter
is a fairly good one. Am I saying that an EMF meter is not a wonderful piece of
equipment in the hunting process NO, it is. Can it's readings be influenced by
over "forces" YES. Another piece of equipment that can be and I
personally think should be used along with an EMF meter is a compass. A compass
will also detect that "magnetic energy" but is not as influenced by
outside forces."
Earl did some further checking for us and this is what he was told,
"Whether it is an electrical field, magnetic field, or radio waves, the
source of the field will always be in the direction of the strongest
signal. It is very important to avoid being fooled into thinking that the
meter points in the direction of the true source. A perfect example of
this involves power lines. You should remember that the direction of
magnetic field lines around a power line is circular and perpendicular to the
wire. So alongside the wire, the field lines would be vertical, while
underneath the wire, the field lines would be horizontal. The proper
orientation of a single axis meter may point the meter at the the wire, or
straight up and down, or even horizontal, depending on the location of the
sensor in the meter and the location of the meter in relation to the
wire. But with a three axis meter the location of the meter is
irrelevant to the reading, so it could be pointing in any direction and still
give a correct reading. Only by moving the meter bodily toward, then away,
from a suspected source can you determine the location of the true
source.".
We
would like to thank the group that allowed us to assist them with their
experiments; our team of researchers that attended, Carol, Marlene, April, Beth,
Teri, Lora and Leona; and Earl for helping us better understand EMF meters and
electromagnetic fields.
|
